The 3040 [3000 PSI 40 GPM] is an industrial strength machine designed to clean large sewers or storm drains. Powered by a 99 HP Kubota diesel engine, the 3000 PSI 40 GPM unit is an ideal machine for municipalities and contractors. The 3 cylinder ceramic plunger pump is directly driven via a reduction gearbox eliminating the need for any belts or pulleys. It is available with up to 750 gallons of water storage on a tandem axle trailer and up to 1000 gallons mounted on certain trucks. The unit comes standard with one hydraulic powered reel with 500′ (150 M) of 3/4″ hose. It is also available with a second reel that can be fitted with 500′ of 1/2″ hose.
The 3000 PSI (206 Bar) 40 GPM unit is great for powerful flushing and has a variety of functions. With higher GPM the 3040 unit is great for moving lots of heavy material, such as sand, rocks, and mud. It is a popular choice for municipalities.
This unit is a great option for storm drains and culverts. It is very effective for powerful flushing of lines up to 48″, and it also has some cutting power when run at 3000 PSI. With the right accessories such as a mini kit, it can handle residential and commercial applications as well.
The 3040 has a direct drive system so the engine does not use a drive belt to power the pump. This will cut down on maintenance, servicing the unit, and downtime for the machine.
The 2065 is available with different mounting options including open trailers, enclosed trailers, open trucks, enclosed trucks and skid mounted units. Different add-ons are also available such as control panels (with or without remote capabilities), additional hydraulic reels, alternative water tanks, mini jet kits, etc.
Click the “Request a Quote” button, send us your information and a US Jetting Unit Sales Specialist will contact you for more details.
|Dimensions||235 x 89 x 73 in|
3/4″ WARTHOG SUPERSPIN III – WH is very effective with grease, roots, and sewer cleaning applications in 6 – 24” pipes using a 3/4″ hose. The nozzle’s rear jets provide propulsion, while the offset front jet gives a complete orbital clean and blockage penetration. The controlled rotation of the nozzle head allows for maximum non-streak cleaning of pipe wall surfaces. The oil filled internal chamber slows the nozzle head from high speed rotation and lubricates the internal bearings for longer nozzle life.
500′ of US Jetting 3/4″ high pressure jetting hose is available with your choice of 3000 PSI and 2500 PSI working pressure. Please select your working pressure, click “REQUEST A QUOTE”, submit the form and we will contact you soon to calculate the shipping and have your hose delivered directly to you.
3000 PSI WORKING PRESSURE – BLUE
2500 PSI WORKING PRESSURE – ORANGE
The Sand and Sludge Nozzle is designed for cleaning heavy debris in large pipes. With a flat weighted stainless steel head, 2 zero degree jets, and 2 fan jets, the nozzle easily glides over debris while allowing the rear jets to provide maximum thrust and cleaning power for large pipes. The Sand and Sludge Nozzle is designed specifically for the 4018 with a 1/2″ hose, but other configurations are available. The 9” drain jet extension is included.
500′ of PIRANHA 3/4″ high pressure jetting hose is available at 3000 PSI working pressure. Please click “Request a Quote”, submit the form and we will contact you soon to calculate the shipping and have your hose delivered directly to you.
3000 PSI WORKING PRESSURE – BLUE
The JMS CONVERSION KIT has everything you need to upgrade to the JMS (Jetter Management System). Wire harness, control panel, remote are all included. It is easy to install on site, with only a few hours of downtime. The JMS makes operating and servicing your jetter easier with its built in fault system that alerts the operator where the problem is within the jetter. This allows for more specific diagnoses and faster resolutions.
The Dragon Jet Nozzle is a heavy duty nozzle designed for 1/2”, 3/4” & 1” hoses with flows of 18-100 GPM with an operating pressure of 4000 PSI. It is a high performance nozzle best for cleaning heavy debris in 12” to 48” pipes.
The HEAVY DUTY DUMP GUN is rated up to 7,000 PSI and 15 GPM. It is highly effective for pressure washing lift stations, manholes, and culverts. This gun differs from shut-off type high pressure guns in that water continuously flows through the gun at all times either at high pressure or at a safe very low discharge pressure. It great for basic surface cleaning and hydroexcavation. A high performance orbital Monro Jet nozzle is highly recommended with this item.
TheMonro-Jet® by mvt nozzles apply a zero degree water stream in an orbital path to surfaces for enhanced cleaning and cutting power. Monro nozzles are usually attached to a Dump Gun and are an excellent choice for surface cleaning, hydro-excavation, and some cutting. They are commonly used with vacuum excavation units. They can be configured for use at pressures up to 12,000 PSI.
Please contact your USJ parts sales representative for pricing.