Shopping Cart

warthog nozzle syringe

WARTHOG OIL SYRINGE

The most important item in maintaining WARTHOG NOZZLES is keeping the tool full of viscous fluid. We recommend that this is done after every 40 to 50 hours of operation. If the nozzle is spinning much faster than when new, this is an indication that it needs to be lubricated with WARTHOG SLOW OIL. The WARTHOG OIL SYRINGE will be needed to fill the nozzle.

$30.00

In stock

Share this product

The 3/8″ MINI SUPER SPIN – WT and the 1/2″ FLEXIBLE SUPER SPIN – WS will both require WARTHOG SLOW OIL and the WARTHOG OIL SYRINGE to inject the oil.

To fill the 1/2″ FLEXIBLE SUPER SPIN – WS with viscous fluid/oil:
1. Fill the Syringe (BC 410) with viscous fluid. This is best done by unscrewing the handle from the tube and pulling out the plunger. Pour fluid into tube and reassemble.

2. Remove the Port Screw (BJ 026) from the Body. Hold the swivel with the hose tail upward as shown. Thread syringe into port, slowly squeeze fluid into swivel; excess fluid will come out under the weep seal. Keep squeezing in new fluid until it comes out clean.

3. Remove syringe; install Port Screw.

1/2″ FLEXIBLE SUPER SPIN – WS
FLUID MAINTENANCE

To fill the 3/8″ MINI SUPER SPIN – WT with viscous fluid/oil:
1. Fill the syringe with viscous fluid. This is best done by unscrewing the handle from the tube and pulling out the plunger. Pour fluid into the tube; reassemble the syringe.

2. Hold the Warthog with the hose end up as shown. Remove the Port Screw from the Warthog. Thread the syringe fitting into the port, and slowly squeeze fluid into swivel until excess fluid comes out around the inlet end. If the fluid coming out appears dirty or watery, keep squeezing in new fluid until it comes out clean.

3. Remove syringe from Warthog, install Port Screw.

*Blow out all water with compressed air before storing tool!

3/8″ MINI SUPER SPIN – WT
FLUID MAINTENANCE

Weight 1 lbs
Dimensions 4 × 3 × 1 in

Reviews

There are no reviews yet.

Be the first to review “WARTHOG OIL SYRINGE”

RELATED PRODUCTS

WARTHOG FAST OIL

$20.00

The most important item in maintaining WARTHOG NOZZLES is keeping the tool full of viscous fluid or oil. We recommend that this is done after every 40 to 50 hours of operation. If the tool is spinning much slower than when new, this is an indication that it needs to be lubricated with WARTHOG FAST OIL.

$20.00Add to cart

SAFETY VEST

$665.00

Basic requirements for safety during jetting are hand and eye protection. US Jetting came out with a new line of safety clothing, including gloves, that can protect against water strikes up to 7500 PSI rotary jet and 3000 PSI straight jet. These gloves, in addition to other safety gear, are highly recommended for all water jet operators to wear. Coveralls, jackets, pants, aprons, safety vests are all available as part of the safety line. Please contact US Jetting for more information.

WARTHOG SLOW OIL

$20.00

The most important item in maintaining WARTHOG NOZZLES is keeping the tool full of viscous fluid. We recommend that this is done after every 40 to 50 hours of operation. If the tool is spinning much faster than when new, this is an indication that it needs to be lubricated with WARTHOG SLOW OIL.

$20.00Add to cart

MANHOLE PROTECTOR

$475.00

With the Manhole Protector ropes, air lines, jetting hoses, and vac hoses slide in and out of the manhole openings with ease. The lines no longer make contact with the sharp edges of a manhole resulting in extended product life. The manhole protector is made in the USA from high-quality ABS plastic and is designed to withstand the rigors of daily use.

$475.00Add to cart

SAFETY GLOVES

$152.00

Basic requirements for safety during jetting are hand and eye protection. US Jetting came out with a new line of safety clothing, including gloves, that can protect against water strikes up to 7500 PSI rotary jet and 3000 PSI straight jet. These gloves, in addition to other safety gear, are highly recommended for all water jet operators to wear. Coveralls, jackets, pants, safety vests and aprons are all available as part of the safety line. Please contact US Jetting for more information.

VAC PUMP

$864.00

The US Jetting Vac Pump has a 2 inch diameter intake and contains 20 feet of discharge hose. When connected to a 1/2″ high pressure jetting hose, four streams of pressurized water shoot in a combined stream away from the pump intake. The high velocity of the water streams creates a venturi vacuum, drawing liquids and debris into the pump. Vac Pumps are very useful for cleaning after a pipeline blockage has been removed. Waste sludge material can be cleaned up with the vacuum, and the liquefied sludge can be flushed down an open drain for disposal.

$864.00Add to cart

Newsletter