At US Jetting we are proud to deliver exactly what our customers need. We don’t just build stock base or standard units. We will work to engineer our jetting units according to any specifications required to tackle any and every job the unit will encounter. All of our mounting options are available with a variety of engine and pump configurations, water tanks, and other equipment. We build to order so our customers can get exactly what they need. Multiple reels, hot water boilers, easement machines, vertical tanks, low profile etc. You name it, we can do it.
Hot Water Units:
Hot Water Jetting Units can have a standard US Jetting 4018 (4,000 PSI @ 18 GPM) Run-Dry Pump coupled with twin high output diesel fired water heaters. The hot water unit pictured has three 100′ lengths of heat resistant, high temperature abrasion coated hose attached to the hydraulic hose reel, a wye splitter and two additional 50′ lengths of hose with two high pressure wash down guns. This unit was designed to complete large concrete surface cleaning on a nightly basis at an international airport. Hot water quickly dissolves chewing gum, oil stains and food stains without chemicals or detergents.
The Industrial Unit was designed in order to give high pressure jetting units the ability to work inside commercial buildings. The Industrial Unit is an electric unit mounted on a moveable cart for easy transport. The unit plugs into a three phase outlet for hassle free jetting in tight spaces. Any US Jetting high pressure units can be manufactured as an Industrial Unit depending on customers’ needs. These machines are excellent for drain cleaning in commercial kitchens, hotels, airports, industrial plants, etc. All standard US Jetting features can be attached to the unit and used in these facilities, except hydraulic reels which would require an independent hydraulic power pack.
Industrial Units are also available with diesel engines if requested.
Off Road Units:
For jetting in hard to access areas, the Off Road Unit was created. These units are custom manufactured to endure any terrain necessary. Off Road Units are often used in flood plains or areas with outfalls which are inaccessible to regular trailers or trucks. For specific jetting needs, please contact a US Jetting sales associate and they can work with US Jetting engineers to design a jet to meet any applications.
US Jetting offers high pressure jetting units manufactured on a single steel frame for final mounting by the customer. These units are manufactured with customer design input to insure easy final mounting on a truck or trailer chassis. Skid units can be manufactured with 300 or 600 gallon water storage tanks or without any water tanks. The full range of US Jetting options can be installed on skid units such as single or dual hydraulic power pull-out reels and control panel systems (remote or non). Skid units can be manufactured in a separate configuration arrangement, with engine pump set, water storage tank and hose reel mounted on individual frame assemblies.
*Custom color options are available for an additional charge.
The HEAVY DUTY DUMP GUN is rated up to 7,000 PSI and 15 GPM. It is highly effective for pressure washing lift stations, manholes, and culverts. This gun differs from shut-off type high pressure guns in that water continuously flows through the gun at all times either at high pressure or at a safe very low discharge pressure. It great for basic surface cleaning and hydroexcavation. A high performance orbital Monro Jet nozzle is highly recommended with this item.
Basic requirements for safety during jetting are hand and eye protection. US Jetting came out with a new line of safety clothing, including gloves, that can protect against water strikes up to 7500 PSI rotary jet and 3000 PSI straight jet. These gloves, in addition to other safety gear, are highly recommended for all water jet operators to wear. Coveralls, jackets, pants, safety vests and aprons are all available as part of the safety line. Please contact US Jetting for more information.
The MICRO HOSE KIT with 3/16″ hose (1/8″NPT) is the smallest diameter high pressure hose kit available. It is a great kit to use in residential areas and restaurants where they have smaller pipes with bends and elbows that the Micro Hose can easily maneuver around. The Micro Hose Kit is available in hose sizes of 75′ and 100′ and works best at 4000 PSI and under.
The US Jetting Vac Pump has a 2 inch diameter intake and contains 20 feet of discharge hose. When connected to a 1/2″ high pressure jetting hose, four streams of pressurized water shoot in a combined stream away from the pump intake. The high velocity of the water streams creates a venturi vacuum, drawing liquids and debris into the pump. Vac Pumps are very useful for cleaning after a pipeline blockage has been removed. Waste sludge material can be cleaned up with the vacuum, and the liquefied sludge can be flushed down an open drain for disposal.
THE ULTIMATE MINI CLEANING KIT with 3/16″ hose (1/8″NPT) includes three additional 1/4” nozzles; a 6 rear Ball Jet Nozzle, a 3 rear 4 forward Chisel Nozzle, and a Retro Spinner Nozzle. It is available in 100′, 150′ and 200′ hose lengths.
The LIGHTWEIGHT WASHDOWN GUN has a 30” long single barrel. The addition of a Safety Dump Gun to a high pressure sewer jetting unit allows for more diverse applications. Lift stations, manholes, and culverts can be washed of debris buildup. When the Washdown Gun is being used at its maximum 3,000 PSI and flows up to 10 GPM, it becomes a high production pressure washer. Construction and mining equipment with heavy dirt buildup can be quickly and thoroughly cleaned.
Basic requirements for safety during jetting are hand and eye protection. US Jetting came out with a new line of safety clothing, including gloves, that can protect against water strikes up to 7500 PSI rotary jet and 3000 PSI straight jet. These gloves, in addition to other safety gear, are highly recommended for all water jet operators to wear. Coveralls, jackets, pants, aprons, safety vests are all available as part of the safety line. Please contact US Jetting for more information.
The JMS CONVERSION KIT has everything you need to upgrade to the JMS (Jetter Management System). Wire harness, control panel, remote are all included. It is easy to install on site, with only a few hours of downtime. The JMS makes operating and servicing your jetter easier with its built in fault system that alerts the operator where the problem is within the jetter. This allows for more specific diagnoses and faster resolutions.
The MINI HOSE KIT is one of the most versatile accessories for any high pressure jetting unit. The kit includes a 1/4” hose (1/8” ends), a 3 rear 1 forward Ball Jet Nozzle, and 2 fittings. The fittings allow the Mini Hose to connect to a 1/2” hose. The Mini Hose Kit is designed to be used in 3 inch pipes and is easily able to negotiate bends. It can also be used when cleaning straight lengths of pipes with diameters of 1 1/2 inches.
THE ULTIMATE MINI CLEANING KIT with 1/4″ hose (1/8″NPT) includes three additional 1/4” nozzles; a 6 rear Ball Jet Nozzle, a 3 rear 4 forward Chisel Nozzle, and a Retro Spinner Nozzle. It is available in 100′, 150′ and 200′ hose lengths.