Shopping Cart

All Categories

Showing 1–15 of 111 results

RPD JETTER NOZZLE

$170.00

Machined from high quality stainless steel, RPD nozzles have a unique two component design. The RPD series of nozzles provide optimum drain cleaning in pipe diameters from 4 inch upwards. The all-purpose nozzle is great for everyday usage to open up pipes and clear blockages. It is specifically designed for use with 1/2″ high pressure jetting hose and pressures up to 6,000 PSI. The rounded RPD nozzle easily negotiates pipe bends and elbows.

$170.00 Select options

$235.00$460.00 Select options

EGGHEAD NOZZLE

$235.00$460.00
Quick View

EGGHEAD NOZZLE

$235.00$460.00

RPD EGGHEAD NOZZLE has either 4 rear and 4 forward nozzles at 18 GPM or 6 rear 4 forward nozzles at 25 GPM. With either configuration, the two piece nozzle comes with a rounded cap for maneuverability and a removable front cap for easy cleaning. It has specially contoured internal geometry to allow the water to enter and exit very efficiently. The USJ Egghead is made of case hardened steel and is available for use with high pressure 1/2”, 3/4” and 1” hoses. They are suitable for pressures ranging from 2,000 – 10,000 PSI and flows from 14 GPM to 65 GPM.

SPECIAL FEATURES:
-Case hardened steel
-Two piece nozzle for easy cleaning and efficient flow
-Rounded cap for maneuverability

$235.00$460.00 Select options

Jetting Nozzle

$53.00$80.00 Select options

BALL JET NOZZLE

$53.00$80.00
Quick View

BALL JET NOZZLE

$53.00$80.00

For a great price point, the Ball Jet Nozzle is perfect to use in damaged or broken pipes. The round shape of the Ball Jet Nozzle is designed specifically to be able to maneuver over joints and curves in pipes. The nozzle orifices are drilled to precise diameters to guarantee accurate pressure and flow.

$53.00$80.00 Select options

$235.00$460.00 Select options

RPD CHISEL NOZZLE

$235.00$460.00
Quick View

RPD CHISEL NOZZLE

$235.00$460.00

USJ RPD Chisel Nozzle has multiple forward firing jets that allow for maximum blockage penetration. Forty percent of the pressurized water flow is directed to the four forward jets to give the nozzle cutting and penetration power, while the other sixty percent goes to the four rear jets to provide thrust for propulsion. This two piece nozzle has specially contoured internal geometry to allow the water to enter and exit very efficiently. It is suitable for pressures ranging from 2,000 – 10,000 PSI and flows from 14 GPM to 65 GPM. The USJ Chisel nozzle is made of case hardened steel and is available for use with high pressure 1/2”, 3/4” and 1” hoses.

 

$235.00$460.00 Select options

4018

The 4018 [4000 PSI 18 GPM] unit is US Jetting’s most popular jetting machine. As the industry leader, it has set the standard in the jetting industry for over twenty years. The 4018 is the only unit with a true run-dry plunger pump. This unit can work in pipes ranging from 1″ – 24″ and can be fitted with tanks sized 100 – 750 gallons or larger if required. The standard unit comes equipped with 500′ of 1/2″ hose. This unit is perfect for all purpose cleaning, but also has the power to tackle grease, roots, residential and industrial lines.

$195.00$295.00 Select options

MICRO HOSE KIT

$195.00$295.00
Quick View

MICRO HOSE KIT

$195.00$295.00

The MICRO HOSE KIT with 3/16″ hose (1/8″NPT) is the smallest diameter high pressure hose kit available. It is a great kit to use in residential areas and restaurants where they have smaller pipes with bends and elbows that the Micro Hose can easily maneuver around. The Micro Hose Kit is available in hose sizes of 75′ and 100′ and works best at 4000 PSI and under.

$195.00$295.00 Select options

COMPLETE HATZ 3 CYL ENGINE FILTER KIT

$149.00

COMPLETE HATZ 3 CYL ENGINE FILTER KIT

Fluids & filters should be changed after the first 50 hours of use and thereafter every 250 hours to maintain top performance. 5 piece set includes Spin-On Oil Filter, 1 Air Filter, Spin-On Fuel Filter, Inline Fuel Filter, and Hydraulic Oil Spin-On Filter.

J-FILTER SET 

$149.00 Add to cart

COMPLETE HATZ 4 CYL ENGINE FILTER KIT

$239.00

6 piece set includes Spin-On Oil Filter, 2 Air Filters, Spin-On Fuel Filter, Inline Fuel Filter, and Hydraulic Oil Spin-On Filter. This filter kit is for the non-tier 4 Hatz Silent Pack Diesel Engine.

2011 AND NEWER J-FILTER-SET-01
2010 AND EARLIER J-FILTER-SET-02

 

$239.00 Select options

911 REPAIR KIT

$279.00

Includes a H2O Selector Repair Kit, an O-Ring Kit for a 4014-4018 pump, (10) 4000PSI Pressure Discs, Pressure Disk Holder, Water Filter Bowl, Water Filter Gasket, and a Water Filter Mesh Element.

J–911-KIT 

$279.00 Add to cart

O-RING KIT

$109.00

4018 O-Ring Kit for units 2002 and newer.

$109.00 Add to cart

SOCK FILTER

$17.00

The SOCK FILTER has a plastic ring to sit on the opening to the water tank. The plastic mesh filter bag hangs down to filter any water source that is pouring into the tank.

$17.00 Add to cart

$395.00$455.00 Select options

ULTIMATE MICRO CLEANING KIT

$395.00$455.00

THE ULTIMATE  MINI CLEANING KIT with 3/16″ hose (1/8″NPT) includes three additional 1/4” nozzles; a 6 rear Ball Jet Nozzle, a 3 rear 4 forward Chisel Nozzle, and a Retro Spinner Nozzle. It is available in 100′, 150′ and 200′ hose lengths.

$395.00$455.00 Select options

WATER FILTER ASSEMBLY

$70.00

The WATER FILTER ASSEMBLY is standard on all US Jetting units. The 1-1/2” Water Filter features an 80 micron stainless steel reusablewire mesh filter element. Mesh Screen, Water Bowl, Top “T” and O-Ring Gasket are available individually as well.

$70.00 Add to cart

$195.00$395.00 Select options

MINI HOSE KIT

$195.00$395.00
Quick View

MINI HOSE KIT

$195.00$395.00

The MINI HOSE KIT is one of the most versatile accessories for any high pressure jetting unit. The kit includes a 1/4” hose (1/8” ends), a 3 rear 1 forward Ball Jet Nozzle, and 2 fittings.  The fittings allow the Mini Hose to connect to a 1/2” hose. The Mini Hose Kit is designed to be used in 3 inch pipes and is easily able to negotiate bends. It can also be used when cleaning straight lengths of pipes with diameters of 1 1/2 inches.

$195.00$395.00 Select options

WATER FILTER TOP “T”

$32.00

The 1-1/2” Water Filter features a clear bowl that a mesh element is place into. The clear bowl screws into the Top “T.” Water flows through the “T” into the filter and then on to the pump.

$32.00 Add to cart

Newsletter