Shopping Cart

warthog sewer jetter nozzle

1/2″ SUPER SPIN II – WH

1/2″ WARTHOG SUPER SPIN II – WH is perfect for grease, roots, and sewer cleaning applications in 6 – 18” pipes using a 1/2″. The rear jets provide propulsion, while the offset front nozzle gives a complete orbital clean and blockage penetration. The controlled rotation of the nozzle head allows for maximum non-streak cleaning of pipe wall surfaces. The oil filled internal chamber slows the nozzle head from high speed rotation and lubricates the internal bearings for longer nozzle life.

$1,468.00

In stock
Clear

Share this product

The SuperSpin nozzles are the most effective tools for sewer and drain cleaning applications. The rear jets provide propulsion, while the offset front nozzle gives a complete orbital clean and blockage penetration. The controlled rotation of the nozzle head allows for maximum non-streak cleaning of pipe wall surfaces. The oil filled internal chamber slows the nozzle head from high speed rotation and lubricates the internal bearings for longer nozzle life.

SuperSpin nozzles are available for use with 1/2″, 3/4″ and 1″ high pressure jetting hose. The 1/2″ and 3/4″ nozzles have 2 rear jets and 1 forward jet, while the 1″ and 1-1/4″ nozzle has 4 rear jets and 1 forward jet. The SuperSpin nozzles also have removable heads which can be exchanged for a descaling head that adds two additional 90 degree jets for more focus on wall cleaning. The forward orbital jet can be removed and plugged for more effective all rear jetting applications.

Within 6 months of its first use this nozzle requires WARTHOG FAST OIL. Please see “FLUID MAINTENANCE” or SUPERSPIN II MANUAL below.

SUPER SPIN II MANUAL

Click Here for the US Jetting Parts Catalog

SUPER SPIN II – WH
FLUID MAINTENANCE

SUPER SPIN II – WH
GENERAL MAINTENANCE

SUPER SPIN II – WH
IN ACTION

Weight 5 lbs
Dimensions 8 × 3 × 3 in
PRESSURE AND FLOW

4000 PSI 14 GPM, 4000 PSI 18 GPM, 4000 PSI 25 GPM

Reviews

There are no reviews yet.

Be the first to review “1/2″ SUPER SPIN II – WH”

RELATED PRODUCTS

VAC PUMP

$864.00

The US Jetting Vac Pump has a 2 inch diameter intake and contains 20 feet of discharge hose. When connected to a 1/2″ high pressure jetting hose, four streams of pressurized water shoot in a combined stream away from the pump intake. The high velocity of the water streams creates a venturi vacuum, drawing liquids and debris into the pump. Vac Pumps are very useful for cleaning after a pipeline blockage has been removed. Waste sludge material can be cleaned up with the vacuum, and the liquefied sludge can be flushed down an open drain for disposal.

$864.00Add to cart

MANHOLE PROTECTOR

$317.00

With the Manhole Protector ropes, air lines, jetting hoses, and vac hoses slide in and out of the manhole openings with ease. The lines no longer make contact with the sharp edges of a manhole resulting in extended product life. The manhole protector is made in the USA from high-quality ABS plastic and is designed to withstand the rigors of daily use.

$317.00Add to cart

SAFETY VEST

$475.00

Basic requirements for safety during jetting are hand and eye protection. US Jetting came out with a new line of safety clothing, including gloves, that can protect against water strikes up to 7500 PSI rotary jet and 3000 PSI straight jet. These gloves, in addition to other safety gear, are highly recommended for all water jet operators to wear. Coveralls, jackets, pants, aprons, safety vests are all available as part of the safety line. Please contact US Jetting for more information.

SAFETY GLOVES

$152.00

Basic requirements for safety during jetting are hand and eye protection. US Jetting came out with a new line of safety clothing, including gloves, that can protect against water strikes up to 7500 PSI rotary jet and 3000 PSI straight jet. These gloves, in addition to other safety gear, are highly recommended for all water jet operators to wear. Coveralls, jackets, pants, safety vests and aprons are all available as part of the safety line. Please contact US Jetting for more information.

WARTHOG FAST OIL

$20.00

The most important item in maintaining WARTHOG NOZZLES is keeping the tool full of viscous fluid or oil. We recommend that this is done after every 40 to 50 hours of operation. If the tool is spinning much slower than when new, this is an indication that it needs to be lubricated with WARTHOG FAST OIL.

$20.00Add to cart

Newsletter