The WATER FILTER ASSEMBLY is standard on all US Jetting units. The 1-1/2” Water Filter features an 80 micron stainless steel reusablewire mesh filter element. Mesh Screen, Water Bowl, Top “T” and O-Ring Gasket are available individually as well.
The US Jetting Vac Pump has a 2 inch diameter intake and contains 20 feet of discharge hose. When connected to a 1/2″ high pressure jetting hose, four streams of pressurized water shoot in a combined stream away from the pump intake. The high velocity of the water streams creates a venturi vacuum, drawing liquids and debris into the pump. Vac Pumps are very useful for cleaning after a pipeline blockage has been removed. Waste sludge material can be cleaned up with the vacuum, and the liquefied sludge can be flushed down an open drain for disposal.
The SAFETY LEADER HOSE is a short length of high pressure jetting hose that is a different color than the main jetting hose. The purpose of a Safety Leader Hose is to notify the operator of how far away the nozzle is when he is withdrawing the hose from the pipe so he knows to shutoff the high pressure water flow. It also acts as a sacrificial hose section, preserving the main hose from the abrasive discharge of the nozzle. Lengths of 10″ or 20′ are available for 1/2″.
The industry preferred COXREELS® design features a sturdy one piece all welded “A” frame base, low profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap.
The 100′ or 150′ of 5/8″ garden hose that comes on the reel connects to the water source with a regular spicket. 10′ of hose is included that goes from the reel to the water tank fill port.
The HEAVY DUTY DUMP GUN is rated up to 7,000 PSI and 15 GPM. It is highly effective for pressure washing lift stations, manholes, and culverts. This gun differs from shut-off type high pressure guns in that water continuously flows through the gun at all times either at high pressure or at a safe very low discharge pressure. It great for basic surface cleaning and hydroexcavation. A high performance orbital Monro Jet nozzle is highly recommended with this item.
The LIGHTWEIGHT WASHDOWN GUN has a 30” long single barrel. The addition of a Safety Dump Gun to a high pressure sewer jetting unit allows for more diverse applications. Lift stations, manholes, and culverts can be washed of debris buildup. When the Washdown Gun is being used at its maximum 3,000 PSI and flows up to 10 GPM, it becomes a high production pressure washer. Construction and mining equipment with heavy dirt buildup can be quickly and thoroughly cleaned.
Basic requirements for safety during jetting are hand and eye protection. US Jetting came out with a new line of safety clothing, including gloves, that can protect against water strikes up to 7500 PSI rotary jet and 3000 PSI straight jet. These gloves, in addition to other safety gear, are highly recommended for all water jet operators to wear. Coveralls, jackets, pants, safety vests and aprons are all available as part of the safety line. Please contact US Jetting for more information.
With the Manhole Protector ropes, air lines, jetting hoses, and vac hoses slide in and out of the manhole openings with ease. The lines no longer make contact with the sharp edges of a manhole resulting in extended product life. The manhole protector is made in the USA from high-quality ABS plastic and is designed to withstand the rigors of daily use.
Basic requirements for safety during jetting are hand and eye protection. US Jetting came out with a new line of safety clothing, including gloves, that can protect against water strikes up to 7500 PSI rotary jet and 3000 PSI straight jet. These gloves, in addition to other safety gear, are highly recommended for all water jet operators to wear. Coveralls, jackets, pants, aprons, safety vests are all available as part of the safety line. Please contact US Jetting for more information.