Flusher Jet Units

Flusher Jet Units

Built with the same dedication and quality that customers have come to expect, US Jetting is pleased to offer a line of high volume water jetters to meet larger diameter pipe flushing demands. Flusher jetters are low pressure, generally 2000 or 3000 PSI with high flows of around 40, 50, or 65 GPM. These units are extremely popular with municipalities because of their ability to move heavy debris in large pipes. Pressure and flow can be adjusted to suit various applications and pipe sizes.

Flushing units use either 3/4" or 1" inch diameter high pressure hose for maximum efficiency. They usually come with 600 or 1200 gallon water storage tanks or larger if necessary. As with all US Jetting equipment, units can be manufactured on tandem axle trailers or mounted on trucks with optional cold weather enclosures. Also available on non CDL sized trucks.



Engine Options
jquery carousel lightboxby VisualLightBox.com v5.9
Reel Options
Reel Options Uses
Standard Pivot The Standard Pivot Reel pivitos on its own axis. It allows the operator to line up with the manhole or pipe during jetting.
Hydraulic Power Pull-Out The Hydraulic Power Pull-Out enables the operator to easily extend the reel beyond the frame so it can moce 180 Degrees.
Dual Reel Dual reels give a high pressure unit versatility to work in various sized pipes with different flow. Changing the hose and pressure gives the ability to do more with one unit.


jquery carousel lightboxby VisualLightBox.com v5.9


Custom Color Options*
jquery carousel lightboxby VisualLightBox.com v5.9

*Custom color options are available at an additional cost.

Photo Gallery
jquery carousel lightboxby VisualLightBox.com v5.9