Open Truck Series
US Jetting 4025 - 600 Gallon Truck, Hydraulic Power Pull-Out Reel with Kubota Diesel Power
Hydraulic hose reel contains 500 feet of 5/8 high pressure jetting hose.
US Jetting 3040 - 700 Gallon, dual Reel Truck Unit
Powered by a 99 hp Kubota Turgocharged Diesel engine, this unit provides 3,000 PSI @ 40 GPM through 500 feet of 3/4" high pressure jetting hose. As second
hose reel with 500 ft of 1/2" hose is used for 3 to 8 inch lines.
US Jetting 4018 - 300 Gallon Unit
US Jetting can custom manufacture high pressure jetting units on open
cab & chassis designed to meet the needs of any customer or application.
Truck mounted high pressure jetting units are very popular choices for
municipalities and sewer cleaning contractors. Typical water tank storage
capacity is 300 or 600 gallons, depending upon the truck chassis capacity.
Open Truck Series units are designed to combine a trailer mounted high
pressure jetting unit with the tow vehicle to increase mobility by a single
unit. US Jetting truck mounted high pressure jetting units are just as
powerful & efficient at jetting as their trailer mounted counterparts with
the same engine & pump set.
Popular US Jetting Options For Open Truck Units:
- Gen II Wireless Remote Control
- Hydraulic Power Pull-Out Reel (single or dual)
- Dual Hydraulic Power Pull-Out Hose Reel
- Directional Safety Arrowboard Warning Light
- Multiple Tool Storage Boxes
US Jetting 4018 - 600 Gallon Truck Unit
A popular choice for municipalities is the US Jetting 4018 pump set mounted on a truck. Producing
4,000 PSI @ 18 GPM, this unit is powerful enough to handle the toughest cleaning jobs. These versatile
units provide daily use reliability. Standard features include a seven position swivel hose reel, 500'
of high pressure jetting hose, Jump Jet pulsation system and twin lockable toolboxes. A two inch hydrant
fill system with air gap reduces tank refill times. This unit features an optional Hatz Silent Pack Diesel engine.
US Jetting 4025 - 600 Gallon Trucks, Kubota Diesel Power
These twin municipal trucks have a US Jetting 4025 Run Dry Pump with 800 feet of 5/8" high pressure jetting hose.
The jetting units are mounted on cab over chassis for optimum mobility in congested urban areas.
US Jetting 4025 - 600 Gallon Truck Unit
Unit has Dual Hydraulic Power Pull-Out Hose Reels & Gen II Wireless Remote Control System. One hose reel contains
500' of 5/8" high pressure jetting hose for 4,000 PSI @ 25 GPM. Second hose reel contains 500" of 1/2" high
pressure jetting hose for 4,000 PSI @ 18 GPM.
Truck chassis is a Chevrolet C-5500 Duramax Diesel with All Wheel Drive. No CDL license required.
US Jetting 4025 - 600 Gallon Truck Unit
Hydraulic Power Pull-Out Reel
Reel extended & in swivel position
|
Us Jetting 4025
4,000 PSI @ 25 GPM PumpSet
|
US Jetting 4025 – 1200 Gallon, PTO Drive Truck Unit
US Jetting 4025 Dual Reel Jetting unit mounted on an International Chassis with 11R22.5 tires,
equipped with an Allison automatic transmission and a 1,200 gallon water tank. The US Jetting 4025
Run-Dry pump is capable of producing 4,000 PSI at 25 GPM through a hose reel with 5/8” high pressure
jetting hose or 4,000 PSI at 18 GPM through a second hose reel with 1/2 ” hose. The US Jetting Pump
is powered by a PTO direct drive attached to the Allison transmission.
A full control station is mounted on the right rear hose reel. A US Jetting Gen II Wireless Remote Control
System was added with control functions integrated into the truck chassis computerized engine control system.
Each of the Dual Hose Reels contain 500 feet of high pressure jetting hose that if needed can be connected
for jetting runs up to a 1,000 feet in length. Each hose reel is mounted on a 7 position swivel hose reel
base for added convenience.
The US Jetting 4025 Pump is mounted just behind the drivers cab door. Pump primer valve, water filter and tank
drain are easily accessed. A secondary hydraulic drive motor was also installed to circulate water through the
jetting system while transporting the truck during cold weather periods.
All truck units have centrally located control panel
for operator convenience
Convenient Layouts
Fuel & Hydraulic Oil Tanks
|
Nozzle storage rack inside
lockable toolbox
|
US Jetting sales, engineering and production staff work closely with customers to design and build all open truck
mounted units to exact specifications. Unit application and functionality are the primary design considerations
for the construction of a high pressure jetting unit that will provide years of productive use.
US Jetting 4018 - 600 Gallon Open Truck, Hatz Silent Pack Diesel Engine
The unit has:
- Hydraulic Power Pull-Out Reel
- Gen II Wireless Remote Control System
- Mounted on a 6-Wheel Drive Diesel Chassis
US Jetting 4018 - 600 Gallon Truck Unit on Ford F-550
US Jetting 4018 and 4025 Units
US Jetting 4018 - 600 Gallon Unit
4,000 @ 18 GPM
|
US Jetting 4025 - 600 Gallon Unit
4,000 @ 25 GPM
|
US Jetting 4018 - 300 Gallon Unit on Ford F-350, Hatz Silent Pack Diesel
US Jetting 4025 - 600 Gallon Unit
|
US Jetting 4025 - 4,000 PSI @ 25 GPM with 600 gallons of water storage, will provide 24 minutes of jetting time.
Unit is mounted on a Kodiak Diesel 6-wheel drive chassis with automatic transmission, no CDL required.
|
US Jetting 4025 - 600 Gallon Unit with Dual Reels
Optional Dual Hose Reels are popular choice for use with US Jetting 4025 pumps; 4,000 PSI @ 25 GPM through
a 5/8" inside diameter high pressure jetting hose or 4,000 PSI @ 18 GPM through a 1/2" inside diameter hose.
Half-inch diameter hose is more versatile for negotiating bends in 4 & 6" diameter pipes.
US Jetting 4018 - 600 Gallon Truck Unit - Trailer Toter
This truck unit was custom manufactured to fill the needs of a cured-in-place lining contractor. The
unit transports a 22' equipment trailer, a high pressure jetting unit and a 4 man crew to a job site utilizing a single vehicle.
When not used for cured-in-place lining jobs, this truck unit performs typical sewer & drain cleaning work. This the contractor's
third US Jetting unit, previously purchasing two US Jetting 4018 - 300 Gallon units.
The Hydraulic Power Pull-Out Hose Reel allows the jetting unit to be used without disconnecting the cured-in-place equipment trailer.
The truck is a Chevy 5500 with a diesel engine & automatic trailer. This unit was on display at the 2009 Pumper Cleaner Environmental
Expo in Louisville, Kentucky.
US Jetting 6018/3036 - 600 Gallon Unit
6,000 PSI @ 18 GPM or 3,000 PSI @ 36 GPM by changing hose reels & nozzles.
Custom paint to match company colors.
Contact US Jetting to inquire about the construction of a high pressure jetting unit to suit your specific application.
Twin US Jetting 4018 - 300 Gallon Municipal Truck Units
US Jetting 3040 - 600 Gallon, dual hose reels
US Jetting 4025 - 600 Gallon Unit - Cab over Truck
|
|
|
|
