Flexible SuperSpin Nozzles
The Flexible SuperSpin Nozzle was specially designed for use in 4" & 6" pipes to negotiate difficult bends and turns.
Employing oil filled - controlled rotation technology, Flexible SuperSpin Nozzles have two rear zero degree jets for
propulsion and cleaning with an added angled zero degree front jet for blockage penetration.
To enhance flexibility and maintain overall nozzle compactness, the nozzle body is mounted on a length of ½" high pressure
wired braided, rubber coated length of hose. An outer collar on the nozzle acts as a rotation free skid to protect the nozzle body.
Flexible SuperSpin
Flexible SuperSpin Nozzles can be fitted or sized with jets for a maximum flow of 18 GPM at 4,000 PSI. Users can replace
front jet with an optional plug to increase pulling power and rear cleaning jet efficiency.
Flexible Super Spin Nozzles are most effective at cleaning grease filled pipes commonly found in restaurants and other
types of food processing facilities. Flexible SuperSpin Nozzles are equally effective in removing roots from building
lateral lines.
Since the introduction of the Flexible SuperSpin in 2002, this nozzle has become the best selling spinning nozzle in the
history of US Jetting.
US Jetting SuperSpin Nozzle Chart
Controlled Rotation Nozzles
Left: SuperSpin for 6" & larger pipes.
Center: Flexible SuperSpin for 4" to 8" pipes.
Right: Mini SuperSpin for 3" to 6" pipes.
Flexible SuperSpin Nozzle
Flexible SuperSpin Nozzle with orbital offset front jet
Flexible SuperSpin Nozzle
Comparison of RPD Nozzle to Flexible SuperSpin Nozzle
Replaceable Flexible SuperSpin Nozzle Jets
|
|
|
|
