Tiger Tail Hose Guides
Tiger Tail Hose Protectors are available in three sizes; 3", 2" and 1 1/2". All Tiger Tail Hose protectors are
36" long & have 20' of polyethylene tie-off rope.
Tiger Tail Hose Guides are simple devices that provide the most protection to high pressure sewer jetting
hoses from abrasion and chaffing damage. Designed to reduce or eliminate friction wear (especially peeling
of hose coating) as the high pressure jetting hose enters a pipe or drain, Tiger Tails Hose Guides provide
the most benefit when the jetting hose is rewound under high pressure tension.
Tiger Tail Hose Protectors should be used with all diameter high pressure jetting hose to prevent friction wear damage.
Tiger Tail Hose Guide
High pressure sewer jetting of main sanitary lines from manholes without the use of a Tiger Tail Hose Guide
will result in unnecessary high pressure jetting hose damage, premature hose failure, expensive replacement
hose costs and the loss of working time.
Tiger Tail Hose Guide
Tiger Tail Hose Guides can be used to protect high pressure jetting hose in differing job applications. Tiger
Tail Hose Guides are excellent high pressure jetting hose protection at any friction point such as door jams when
working inside of buildings or at the roof edge when working on top of buildings.
Tiger Tail Hose Guides can be used in many places to reduce friction wear to high pressure jetting hose.
Use of a Tiger Tail
Use of a Tiger Tail to protect high pressure jetting host through basement
Alternative Use of Tiger Tails
Use of Tiger Tail provides a smooth glide surface over rough surfaces for high pressure jetting hose. This setup was though a basement ventilation fan to access a restaurant main drain line.
All High Pressure Sewer Cleaning units should carry two or more Tiger Tails for unusual job setups.
|
|

|
|