Mini Jet Kits

The most versatile accessory for any high pressure jetting unit. The US Jetting Mini Jet Kit with a 3 Rear, 1 Forward Ball Jet delivers water up to 4,000 PSI within the smallest of pipe diameters through a1/4" inside diameter flexible hose. Mini Jet Kits are designed for use in pipes with diameters from 3 to 6 inches with multiple bends. Mini-Jet Kits can also be used for cleaning straight lengths of pipe with diameters of 1Â½ inches.

Cleaning indirect drains at a resturant with a Mini-Jet Kit

Mini-Jet Hose Kits are available in 100', 150', 200', 250', and 300' lengths with a 3 Rear, 1 Forward Ball Jet. Mini-Jet Kits include a 1/2" NPT female swivel connector for fast & easy connection to the main high pressure jetting hose. A unique feature of US Jetting Mini Jet Kits is the ability to reverse the hose connection end and the nozzle (ball jet) end. This allows for increased pipe cleaning effectiveness for cleaning branch lines attached to a main building drain. This method of line stringing is also useful for pulling or threading the larger 1/2" hose into normally inaccessible places. Male NPT threaded ends allows for the coupling of two Mini Jet hoses together (with a double female coupler) for non-typical longer pipe lengths.

Mini-Jet Hose Kits can be used with an array of US Jetting spinning nozzles or chain flails for more aggressive small diameter pipe cleaning applications.

Mini Jet Kit with 3 Rear, 1 Forward Ball Jet

Mini Jet Kit with Arrowhead Penetrator Nozzle

6 Rear & Two 3 Rear, 1 Forward Ball Jets

US Jetting Mini Jet Kits can be used with most brands of high pressure jetting units. Call the US Jetting Parts Department for details about use of Mini Jet Kits with high pressure jetting units from other manufacturers.

Mini Jet Kits

A quarter shows the relative size of the ball jet nozzle on Mini Jet Kits. Rounded nozzle surface allows for easy turns at bends & elbows. Lightweight Mini Jet Hose is very flexible and easily passes through tight pipe bends and elbows.

Flexible US Jetting Mini Jet Hose

Flexible US Jetting Mini Jet Hose is rated at 4,000 maximum working pressure with a 2.5 minimum burst rating.

Comparison of Mini-Jet Kit

Comparison of Mini-Jet Kit with 3 Rear, 1 Forward Ball Jet to Standard RPD Nozzle

Lightweight Ergonomic Carry Reel

US Jetting Erogonomic Lightweight Hose Reel with Available 150' Mini-jet Hose Kit

Convenient Mini Jet Carry Hose Reel

Available with Single Handle Release Unit Mount

Mini-Jet Kits are a popular option on new US Jetting units, Mini Jet Kits ordered with Carry Reel are installed with base mount holder for secure transport with the US Jetting unit. A single lever release allows for easy detachment from the unit. The Carry Reel is connected to the main high pressure jetting hose by a high pressure swivel attached to the center of the Carry Reel.

Mini-Jet Hose Reel Kit, Carry Reel and Single Lever Release Base Mount - Attached to Unit A-Frame

Mini-Jet Hose is the perfect accessory for high pressure jetting inlet & outlet lines of grease interceptors.

Hole Sawing a Pipe for Cleaning Access

Use a 1-1/8" hole saw to drill through a pipe for MiniJet Nozzle to access pipe for cleaning. Upon completion of work, plug hole with re-usable expansion plug.

this process Allows access in front of the blockage, reduces mess or the need to remove surcharged clean-out caps.

This technique works on pipes 2" and larger, horizontal or vertical pipes made of cast iron, ductile iron or plastic materials. Check local plumbing codes to see if this technique is acceptable.