US Jetting Gen II Wireless Remote Control System 

The factory installed optional Gen II Wireless Remote Control System is available for most US Jetting high pressure jetting units. The Gen II Wireless Remote Control System allows operators to control water on & off functions remotely from the unit. This is an especially useful tool for high pressure jetting within buildings, on rooftops or in basements. 

The Gen II Wireless Remote Control System can be used with all types of US Jetting attachments such as the Mini-Jet Kit, Micro-Mini Jet Kit, Vac Pump or Safety Dump Gun.  Gen II Wireless Remote Control Systems can be installed on all types of open or enclosed trailer units, open or enclosed truck units and skid unit (limited to certain engine types and models).


Operators need to depress the green button on the handheld remote control first to activate the Gen II Wireless Remote Control System. Once the system is activated, all control functions at the high pressure jetting unit become de-activated, thus unit control is by the handheld unit only. After the Gen II Wireless Remote Control System is activated, operators then press the green button to turn the high pressure water flow on and press the green button again to turn the high pressure water flow off. The red button on the handheld control is used to turn the high pressure jetting unit engine off. The red button should be used to shut the high pressure jetting unit off during an emergency.

The Gen II Wireless Remote Control System also includes an auxilliary wired remote control component. A cable reel with 200 feet of wire cable connected to a foot activated controller is used when interference of wireless signals occurs or where the use of wireless devices is prohibited.